Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Pullman, WA

Oil Stain Removal in Pullman, WA

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas. Typical cost $100-$300.

From the free quote to the final rinse, oil stain removal in Pullman, WA follows a simple process: inspect, protect, clean, rinse and check.

How we clean it

Degreaser and hot-water pressure washCleaning method

Signs you need oil stain removal

  • Dark oil spots where cars park
  • Grease near grills and dumpsters
  • Transmission or brake fluid stains

Why it gets dirty

  • Vehicle leaks
  • Cooking grease
  • Spilled fuel and fluids

What you can do yourself

  • Blot fresh spills with cat litter or absorbent
  • Don't spread them with water
  • Fix the leak

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Spreading oil into a larger stain
  • Oily water going into storm drains
  • Deep, old stains may lighten but not disappear completely

Our process for oil stain removal

  1. Apply a degreaser and let it dwell
  2. Agitate
  3. Clean with hot water where available
  4. Recover or control wash water
  5. Repeat on stubborn spots

Typical oil stain removal prices

$100-$300Typical range for typical driveway oil spots
1-2 hoursTypical time on site
As neededRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Local oil stain removal for Pullman, WA

Moss and algae stains, plus tannin stains from fir and cedar needles, are the usual problems on Washington concrete and decks.

We provide oil stain removal across Pullman (ZIP codes 99163 and 99164) and nearby towns including Moscow, ID (8.5 mi), Colfax (13.5 mi), Clarkston (22.7 mi) and Lewiston, ID (23.1 mi). Call (555) 010-0000 for a free quote in Pullman.

Oil Stain Removal: frequently asked questions

How much does oil stain removal cost in Pullman, WA?

Oil Stain Removal typically costs $100-$300 for typical driveway oil spots, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for oil stain removal?

Oil Stain Removal is usually done with degreaser and hot-water pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is oil stain removal safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule oil stain removal?

As needed. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Pullman, WA

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

HOA & Apartment Pressure Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $800-$5,000

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Pressure Washing for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $150-$600

Sidewalk & Walkway Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $100-$250

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Paver Cleaning & Sealing

Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color.

Typical $600-$1,800

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Pullman, WA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote