Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Pullman, WA

Rust Stain Removal for Stucco in Pullman, WA

Soft wash for stucco. Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry. Typical cost $150-$500.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Rust Stain Removal for Stucco in Pullman, WA brings it back, usually in a single visit. On stucco, the method we use is soft wash.

The right method for the job

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

What to know about cleaning stucco

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

When to book rust stain removal for stucco

  • Orange or brown streaks where sprinklers hit
  • Orange speckles from fertilizer granules
  • Rust rings under furniture or planters
  • Orange runoff below metal railings

Why it gets dirty

  • Iron in well water or irrigation water
  • Fertilizer containing iron
  • Rusting metal furniture, railings and fixtures

Easy upkeep between cleanings

  • Sweep fertilizer granules off concrete right after spreading
  • Adjust sprinklers to avoid walls and paths
  • Ask about an iron filter for well-water irrigation

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Using the wrong acid, which can etch concrete or discolor siding
  • Pressure washing, which doesn't remove rust and can etch the surface

Our process for rust stain removal for stucco

  1. Identify the stain source
  2. Apply a surface-safe rust remover
  3. Let it work and rinse
  4. Repeat on stubborn spots
  5. Advise on stopping the source

Rust Stain Removal for Stucco cost in Pullman, WA

$150-$500Typical range for typical sprinkler or fertilizer staining
1-3 hoursTypical time on site
As needed; stains return if the source isn't fixedRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Local rust stain removal for stucco for Pullman, WA

Moss and algae stains, plus tannin stains from fir and cedar needles, are the usual problems on Washington concrete and decks.

Crews serve all of Pullman (ZIP codes 99163 and 99164), plus Moscow, ID (8.5 mi), Colfax (13.5 mi), Clarkston (22.7 mi) and Lewiston, ID (23.1 mi). Call (555) 010-0000 for a free quote in Pullman.

Rust Stain Removal for Stucco: frequently asked questions

How much does rust stain removal for stucco cost in Pullman, WA?

Rust Stain Removal for Stucco typically costs $150-$500 for typical sprinkler or fertilizer staining, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for rust stain removal for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is rust stain removal for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule rust stain removal for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Pullman, WA

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

HOA & Apartment Pressure Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $800-$5,000

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Pressure Washing for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $150-$600

Sidewalk & Walkway Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $100-$250

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Paver Cleaning & Sealing

Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color.

Typical $600-$1,800

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Pullman, WA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote